FulaSeal 700 Roof & Gutter

• Plastics (pre-test)
• Zincalume
• Steel
• Lead
• Glass
• Fibreglass
• Galvanized Iron
• Aluminium
• Terracotta
• Masonry
• Ceramic Tiles
• Stainless Steel

Not recommended for: structural glazing, polycarbonate, burst pipes or rusted guttering as a plug or seal, constant water immersion, cannot be painted over.

• Grey
• Translucent
• Black

• Sealing and weatherproofing roof and rainwater systems
• Sheet metal and aluminium roofing applications
• Sealing guttering, flashing and downpipes
• Sealing exterior cladding

• All surfaces must be clean, dry, sound and free from dust, oil, old sealant or other contamination. For best results wipe all surfaces with Isopropyl Alcohol (IPA), using a lint free cloth. Adhesion to metals can be further improved by light sanding.
• Application: Mask either side of joint to produce a neat finish. Cut tip off cartridge, fit nozzle, load into H.B. Fuller caulking gun and trim nozzle to desired size.
• Gently squeeze trigger to dispense and push sealant into joint to ensure complete filling. Within 5 minutes of application, finish surface with wet spatula or other smooth implement. Remove any masking tape before the sealant skins.