FulaSeal 701 Ultra Clear

FulaSeal 701 Ultra Clear™ is a highly flexible sealant which guns out white, then dries clear.

FulaSeal 701 Ultra Clea is a highly flexible sealant which guns out white, then dries clear for easy application/visibility. Ideal for sealing around windows and doors, and sealing roofing, especially polycarbonate. FulaSeal 701 Ultra Clea is a paintable alternative to silicone or solvent borne sealants.

Key Benefits

Isocyanate & solvent free
Excellent resistance to weathering and UV, resists yellowing
Guns white & dries clear for easy application
Highly flexible
Water based
Easy wash up
Paintable
Mould resistant
Alternative to silicone or solvent borne sealants

02 9771 3777

Substrates

Fibreglass
Glass
Metal
Plasterboard
Concrete
Cement Sheet
Ceramic Tiles
Brick
Plastics (pre-test)
Timber

Not recommended for: permanent water immersion, enclosed use between non porous surfaces, joints over 10mm wide by 5mm deep, foot traffic areas.

Colours

White (dries clear)

Uses

Sealing polycarbonate roofing
Sealing around windows & doors
Sealing gaps & cracks in the bathroom & kitchen

How To

All surfaces must be clean, dry, sound and free from dust, oil, old sealant or other contamination. For best results wipe all surfaces with Isopropyl Alcohol (IPA), using a lint free cloth. Adhesion to metals can be further improved by light sanding.
Application: Mask either side of joint to produce a neat finish. Cut tip off cartridge, fit nozzle, load into H.B. Fuller caulking gun and trim nozzle to desired size.
Gently squeeze trigger to dispense and push sealant into joint to ensure complete filling. Within 5 minutes of application, finish surface with wet spatula or other smooth implement. Remove any masking tape before the sealant skins. Protect sealant from water until it dries clear. Use good quality, water based paint if required.

Tips