HMR Supplies Logo

Half Round Gutters

Half Round Gutters

Categories: |

Half Round Gutters coated with Zinc-Aluminium /Zinc-Aluminium-Magnesium alloy and COLORBOND® steel will give excellent durability in almost all locations more than 200m from a marine environment or in some light industrial applications. 

Available Sizes: 150mm,200mm,250mm,300mm,350mm & 400mm

Half Round Gutters coated with Zinc-Aluminium /Zinc-Aluminium-Magnesium alloy and COLORBOND® steel will give excellent durability in almost all locations more than 200m from a marine environment or in some light industrial applications. 

  • High Water-Carrying Capacity  
  • Curved Profile promotes self-cleaning 
  • Supports all fascia types in 150mm or 200mm sizes  
  • Available with external brackets only brackets snap clip the Fascia board on certain profiles.  
  •  A minimum fall of 1 in 500 for all gutters as this is a design requirement for the gutter and downpipe selection table. Good fall reduces the risk of leaf and debris built-up that could otherwise effect durability.

 

Available Sizes

Style Size Custom Cut
150mm

Available in a Flatback Option

79mmx163mmx104mm Up to 9M
200mm 100mmx217mmx128mm Up to 9M
250mm 3mm A4 BKT Required Up to 8M
300mm 3mm A4 BKT Required Up to 8M
350mm 5mm A4 BKT Required Up to 8M
400mm 5mm A4 BKT Required Up to 8M
  • Min charge 2m

 

Accessories 

  • Internal Brackets
  • A4 Brackets 3mm-5mm Ally Powder Coated (available standoff)
  • Internal and External Casted Corners for 150-200mm Halfroud
  • Custome Mitred Internal and External Corners 45-90 degrees
  • Stopends
  • Custom Nozzles

The gutter shall be Stramit [insert Half Round Gutter type] as selected based on size and performance. Material shall be protected steel sheet to Australian Standard AS1397 with a minimum yield stress of 550MPa and an AM100/AZ150 coating with an oven-baked paint film of selected colour, or a plain AM125/AZ150 coating.

All accessories are to be fully compatible as recommended by the manufacturer. The product and its accessories shall be installed strictly in accordance with the manufacturer’s recommendations. Flashings and all adjacent products shall be supplied in compatible materials as specified.

All work shall be fixed in a workman like manner, leaving the job clean and weather tight. All debris (screws, rivets, cuttings and filings, etc) shall be cleaned off daily. Repair all minor blemishes with touch up paint supplied by the manufacturer.

Note: Some products are supplied in 300MPa steel with galvanised Z275 coating.

Why Choose HMR Supplies?

Extensive Range

Fast Delivery

Quality Guaranteed

Established in 1975

Have a question or need assistance finding a product?

Enquire Now

For all quote requests or general enquiries, please complete the below form and our team will respond as soon as possible.

Product Enquiry

Complete the below form & our team will be in touch as soon as possible.

Enquiring About Half Round Gutters